Preform Fixture Calibration

Calibration Point is a physical position for BlackTrax to referencing the difference between software and physical environments.

At least 5 Calibration Points needed for perform a fixture calibration. The suggestion position for Calibrations points are stage concerns and stage center.

Set a Classic Beacon to Calibration Beacon:

1. Open Device Manger application.

2. Select a Classic Beacon for calibration.

3. Enable Calibration Beacon then click Apply.

4. Connect the Calibration Wand to Calibration Beacon string output 1.

Calibrating Fixture:

1. Go to BlackTrax application, In Fixture Calibration View:

   1. Select fixtures, Click Assign Beacon.

   2. Select Calibration Beacon.

2. Move the Calibration Wand to first point, push the "A" button on the Calibration Beacon to freeze the light.

3. Move the Calibration Wand's LED to the center of the light spot, push the "B" button on the Calibration Beacon to capture points.

4. Repeat Step 3-4 for each Fixture.

5. Repeat Step 2-5 for each point.